Metallurgy

Conductix-Wampfler offers Energy & Data Transmission Systems for the Metallurgy market

Global economic expansion has greatly increased the demand for iron, steel, aluminum, and copper. Scrap handling facilities, steel plants, rolling mills, aluminum smelters, and electrowinning operations require rugged material handling machines that place high demands on energy and data transmission systems. Reliability is of paramount importance, as any unscheduled downtime will cause waste and lost productivity. Electric systems must withstand high heat, sparks, metal splatter and conductive dust.  Aluminum pot line cranes need  conductor systems that can handle high currents during the stationary operating cycle. In steel mills, mission-critical charging and ladle handling  cranes must operate where furnaces and molten steel ambient heat often exceeds 70°C. To survive,  cables need special heat shielding and  conductor rails often require high-heat insulation. Bar, billet and coil handling  cranes operate at high speeds and must position and turn loads accurately. Lastly, the environment around electrowinning and plating lines will corrode ordinary electrification components.

Conductix-Wampfler products are used in metals facilities all over the world. We understand metallurgical processes from raw material supply, to metal making, to final finishing. With our global sales and service network, we are always close to your business for local service and support. If you need on-site installation assistance or a complete turnkey-job, there is no more experienced partner than Conductix-Wampfler.

Our products for metal plants include:

Conductor Rails – provide runway power for Charging Cranes, Ladle, and Tundish Cranes, slab/billet cranes, and coil/bar/plate handling cranesInsulated bars are used up to 1500 amp;  Welded Cap Rail for 2500 to 6000 amps. They power  cranes in corrosive sintering, plating, and electrowinning operations, with optional Dura-Coat protection and supply continuous current draw for aluminum pot line  cranes that operate while stationary.

Cable Festoon Systems – reliable  cable handling for bridge power to all  process and handling cranes with straight or curved runs. Our optionally pre-assembled systems minimize installation time.

Motor-Driven Reels – are low maintenance and manage  cables and hoses for transfer cars, dependably.

Spring-Driven Reels – provide power for  scrap crane magnets and other uses.

Energy Guiding Chains – manage  cables and hoses for various types of moving equipment.

Slip Ring Assemblies – with rugged enclosures, transfer power and control signal to rotating ladle turrets on continuous casters or provide rotating control/power for pot line cranes.

Mobile Manipulator in a smithy

Technical requirement: Main power supply for the Manipulator
Operator: ZVU Kovárna, a.s. [CZ]

More Information

Process-Overhead Crane in a steelwork

Technical rerequirement [s]: Power supply for 2 crabs of a Process-Overhead Crane
Operator: Pilsen Steel, a.s.

More Information

Process Crane in a Steelwork

Application: Process Crane in a Steelwork
Operator: Vítkovice, a.s, Ostrava (CZ)

More Information

Process Crane in a smithy

Technical requirement: Main pwer supply for a Process Crane
Operator: Pilsen Steel

More Information

Process Crane in a Steelwork
[Power supply for lifting magnet]

Application: Process Crane in a Steelwork [Power supply for lifting magnet]
Operator: Vítkovice, a.s, Ostrava (CZ)

More Information

Transfer Car

Application: Transfer Car
Operator: Třinecké železárny a.s [CZ]

More Information

Festoon System - Crane in steelwork

Application: Crane E97 – Pan-transport Crane
Customer: EIMG

More Information

Pages