Economical Protean™ Radio Remote Controls provide safe and reliable operation of many

types of electrical machinery and crane controls. These FM radios have internal antennas

for a 330 foot (100 meter) range and many advanced security and reliability features. Enclosures are NEMA 4 (IP65).Kits include one receiver and either one or two transmitters, as shown on pages 4-9 in CAT1002 Radio Remote Controls.

Transmitter specifications:

• Runs on 2 standard “AA” alkaline batteries; long battery life - includes low power indicator

• All single-speed buttons (except the HT transmitter discussed below)

• Jammed button detection

• Shock resistant case

• Weighs only 0.34 lbs. (155g) with batteries

• FCC Part 15 - no license required

Receiver specifications

• Multiple supply voltages:
     DC: 12 ~ 24 Volts DC (or 24 Volts AC)

     AC: 48/110, 110/220, plus or minus 10%, 50/60 Hz. Default is 48/110 w/110 selected

• Independent common configuration for mixed control voltage applications

• Power-on/mainline contact

• LED display of power and contact closure status

• Sensitivity: Approximately -105 dBm

• Prewired cable, 6 feet long (1.83 m)

• Control relay rating: 10A @ 125 VAC; 5A@ 250 VAC; 8A @ 30 VDC

• 4-point shock mount designed for demanding mobile and industrial applications.

The optional HT transmitter- the third receiver from the right in the photo above - is ideal for controlling hoist and trolley operation. It features two-speed push buttons with distinct position detents and a large mushroom E-stop switch with removable water-proof key.

The L8 Transmitter - shown at the far right above - works with the Protean receiver as well. The L8 is ideal for applications that require single-speed operation for three motions, such as a hoist, trolley, and bridge motions for an overhead crane.