Remove document <span id="remove-document-name"></span> from <span id="remove-cart-name"></span>?
Global economic expansion has greatly increased the demand for iron, steel, aluminum, and copper. Scrap handling facilities, steel plants, rolling mills, aluminum smelters, and electrowinning operations require rugged material handling machines that place high demands on energy and data transmission systems. Reliability is of paramount importance, as any unscheduled downtime will cause waste and lost productivity. Electric systems must withstand high heat, sparks, metal splatter and conductive dust. Aluminum pot line cranes need conductor systems that can handle high currents during the stationary operating cycle. In steel mills, mission-critical charging and ladle handling cranes must operate where furnaces and molten steel ambient heat often exceeds 70°C. To survive, cables need special heat shielding and conductor rails often require high-heat insulation. Bar, billet and coil handling cranes operate at high speeds and must position and turn loads accurately. Lastly, the environment around electrowinning and plating lines will corrode ordinary electrification components.
Conductix-Wampfler products are used in metals facilities all over the world. We understand metallurgical processes from raw material supply, to metal making, to final finishing. With our global sales and service network, we are always close to your business for local service and support. If you need on-site installation assistance or a complete turnkey-job, there is no more experienced partner than Conductix-Wampfler.
Our products for metal plants include:
Conductor Rails – provide runway power for Charging Cranes, Ladle, and Tundish Cranes, slab/billet cranes, and coil/bar/plate handling cranes. Insulated bars are used up to 1500 amp; Welded Cap Rail for 2500 to 6000 amps. They power cranes in corrosive sintering, plating, and electrowinning operations, with optional Dura-Coat protection and supply continuous current draw for aluminum pot line cranes that operate while stationary.
Cable Festoon Systems – reliable cable handling for bridge power to all process and handling cranes with straight or curved runs. Our optionally pre-assembled systems minimize installation time.
Motor-Driven Reels – are low maintenance and manage cables and hoses for transfer cars, dependably.
Spring-Driven Reels – provide power for scrap crane magnets and other uses.
Energy Guiding Chains – manage cables and hoses for various types of moving equipment.
Slip Ring Assemblies – with rugged enclosures, transfer power and control signal to rotating ladle turrets on continuous casters or provide rotating control/power for pot line cranes.
Jay Radio Remote Controls – offer a safe way of operating or monitoring machines from a distance. The comprehensive range of industrial and safety radio remote controls offers countless solutions to adapt to an extensive number of metallurgy applications.
Hot Metal Overhead Crane
Project installation date
Conductix-Wampfler AB [SE]
BANG Kransysteme | Germany
Höganäs Sweden AB | Halmstadt | Sweden
Energy sypply and data transmission to one overhead crane with Conductor Rails and ProfiDAT®
[ProfiNet data transmission / Real-time data transmission to the crane PLC]
Travel length [Crane bridge]
Travel speed [Crane bridge]
Crane loading capacity
75 t / 25 t / 6,3 t
• ProfiDAT®, Program 0514
• Aluminum Conductor Rail, Program 0813 SingleFlexLine with standard PVC insulation up to +55 °C
• Aluminum Conductor Rail, Program 0813 SingleFlexLine with PPE insulation for ambient temperatures up to +85 °C
• ProfiDAT® current collector with protective earth carbon brush and data transmission antenna
Additonal product information
• ProfiDAT® for grounding and data transmission
• PPE insulated conductor rail segments are installed in the areas with the highest ambient temperature. Additional steel plates shield the conductor rails and ProfiDAT® profile from the radiation heat
ProfiDAT® is a contactless data transfer solution for communication between fixed and mobile control units from Conductix-Wampfler. ProfiDAT® makes it possible to achieve reliable transfer of mixed data (video, audio and real-time control) at very high data rates using Conductix-Wampfler slotted waveguide technology. Data can be safely transferred at rates up to 100 Mbit/s with average latency of only 3ms. The unique configuration of waveguide and mobile antennas results in a system with integrated shielding. This isolation means that ProfiDAT® is license free and can safely transfer data, even in the most challenging radio environments (e.g. shipping container terminals).
ProfiDAT® is excellently suited for integration into conductor rail systems because the waveguide profile has been engineered for dual use as the protective earth (PE) conductor rail. This results in a very compact complete system because an additional PE conductor rail is not required. The ProfiDAT® data transfer system can be combined with multiple available Conductix-Wampfler conductor rail systems.
Standard Application Data
Single pole conductor rail preferably for straight tracks
Standard application data