Remove document <span id="remove-document-name"></span> from <span id="remove-cart-name"></span>?
Generally the basic function of IPT® Floor systems is the same as that of other IPT® systems. But there are some additional or specific aspects to consider.
The cable loop must be installed in a way that complete coverage of the supply of vehicles along the entire travelling path is given. This way installed the cable routing also defines the travelling path of vehicles. With iDAT it is possible to detect the magnetic field around the cabling and to supply a guidance signal to the vehicle control and to control so the movement of the vehicle. Unwanted and expensive guidance slots become obsolete this way. Various travelling paths can be defined. Switches, crossings, etc. are no problem. The pickup just needs to be placed so that it is exposed to the magnetic field in a sufficient way.
Track Supplies do convert mains voltages of usually 50 or 60 Hz into a higher frequent output voltage.
Usually IPT® systems are run at 15 or 20kHz. Only with this higher frequency of the output voltage and so the alternating magnetic field around the track cable an efficient non-contact power transfer becomes possible. Depending on the Regulators used on the secondary side track currents of 80 or 125 A are used.
|6 kW Track Supply Module 125 A||6 kW|
|16 kW Track Supply Module 125 A||16 kW|
|35 kW Track Supply Cabinet 125 A||35 kW|
Typical applications for F-Pickups are those, where obstacles on the floor are not allowed, i.e. at automated guided vehicle lines.
|Description**||Nom. Power**||Output Voltage**|
|750 W F-Pickup||750 W||560 V DC|
|2,5 kW F-Pickup||2,5 kW||560 V DC|
* for other sizes, output voltages and design please do contact Wampfler
** for detailed product data please take the corresponding product documentation