The SinglePowerLine 0812 conductor rail system is used as a standard product to power bridge-, portal- and process cranes, but can also be used on a wide variety of other applications, such as amusement rides and people movers, where higher amperages are needed. 
The safe, refined connector system and clip-on rail holders, in combination with optional mounting brackets, permit fast, economical assembly.

Available with different rail materials, suitable for most industrial environments. Designed at high safety level for complex systems and an unlimited numbers of poles.

Use the Single PowerLine 0812 conductor rail when ...

  • your application requires high loads from 200 A up to 400 A
  • your application requires high loads even at standstills
  • you need high availability even in harsh environmental conditions

Key features:

  • System length and number of poles are easily expandable
  • Simple and precise installation
  • Clip-on rail holder for easy and economical assembly
  • Finger-safe design and high-quality insulation
  • On-site bending with optional bending device for curves possible
  • Curved segments available
  • low space requirements
Specification
  • Conductor Rail Type: Single Pole
  • Permissible Environment: Indoor / Outdoor
  • Collector Ampacity: 100, 80, 40 A
  • Ampacity Conductor Rail: 25, 200, 250, 320, 400 A
  • Nominal Voltage: 690 V (UL 600V)
  • Conductor Material: Copper, Aluminum/Stainless Steel, CopperECO
  • Insulation Material: PVC, PPE
  • Temperature Range: -15 to +55 °C
  • IP class: 
    • IP23 (horizontal installation)
    • IP21 (vertical installation)
  • Typical Pole arrangement: individual; 1 to infinite
  • Required installation space: Width: 230 mm, Height: 220 mm
  • Support / Hanger Distance: 1.5 m
  • Curves possible: yes, with bending on site, or pre-manufactured curves.
  • Additional Safety Features: Fall-arresting device available
  • Approvals: CE / NRTL / UL
Main Applications
  • EOT cranes
  • People Movers
  • Special purpose equipment
ProShell - 0812 Quick Guide

ProShell - 0812

MOV0800-0001 ProShell 128 Overview

0:31 min

MOV0800-0015 ProShell 206 Overview

0:32 min

MOV0800-0002 Console Assembly

0:38 min

MOV0800-0003 Console Aligning

0:29 min

MOV0800-0004 Support Profile, Aligning and Fixing

0:40 min

MOV0800-0005 Fixing ProShell to the System Hanger Clamps

0:30 min

MOV0800-0006 Anchor Point Pre Assembly

0:21 min

MOV0800-0007 Joining of Support Profile

0:28 min

MOV0800-0024 Barcode Tape ProShell

2:53 min

MOV0800-0008 Placing the Power Feed into the Basic Module 0831

0:42 min

MOV0800-0010 Conductor Rail 0831 Mounting

3:21 min

MOV0800-0012 Strain Relief Assembly 0831

0:56 min

MOV0800-0013 Anchor Point Final Assembly 0831

0:51 min

MOV0800-0017 Connecting Rail ProShell 0812

1:03 min

MOV0800-0018 Assembly Line Feed ProShell 0812

1:37 min

MOV0800-0019 Mounting further Rails 0812

0:49 min

MOV0800-0020 End Sections and End Caps Assembly ProShell 0812

0:55 min

MOV0800-0021 Mounting the End Assembly 0812

0:49 min

MOV0800-0022 Install Power Feed, Terminal Box ProShell 0812

0:44 min

MOV0800-0023 Current Collector Tolerances ProShell 0812

0:53 min

MOV0800-0025 Earthing Assembly ProShell 0812

1:17 min
Downloads
FAQ

Why choose the Single PowerLine 0812?

The 0812 series is a proven standard for more than 35 years in various applications where modularity, robustness and reliability are required. Sophisticated connecting and mounting technology ensure quick and economical installations with minimal space requirements.

Is the Single PowerLine 0812 for indoors or outdoors?

Single PowerLine 0812 can be used outdoor.

Video

Videos Single PowerLine 0812

MOV0812-0001 System Overview 0812.mp4

2:24 min

MOV0812-0002 Cutting Rails.mp4

1:34 min

MOV0812-0003 Bending Rail (Bending Device)

4:48 min

MOV0812-0004 Mounting Hanger Clamps.mp4

2:25 min

MOV0812-0005 Connecting Rails and Mounting Line Feed

3:27 min

MOV0812-0006 Mounting Anchor Points.mp4

0:58 min

MOV0812-0007 Mounting and Adjusting Expansion Unit.mp4

2:41 min

MOV0812-0008 Mounting End Cap.mp4

0:52 min

MOV0812-0009 Mounting the Air Gap Insulation Section.mp4

1:19 min

MOV0812-0010 Current Collector Tolerances

1:18 min

MOV0812-0011 Mounting Hanger Clamps and Anchor Points

2:41 min

MOV0812-0012 Mounting Fall Arrest Device

1:34 min

See what more we have to offer

Related products

Innovative Energy and Data Management Starts with Conductix-Wampfler!