Pika ATEX Radio Remote Control Series

No, there are no lights available. However, all the operating indications (radio link status, battery status, status of buttons, information feedback, etc.) are visible on the screen.

No, the Pika ATEX series all have a screen. Depending on your project and safety requirements, our UD radio remote controls could be the right option. 

There are two axes available for one joystick. X and Y axes can be used either separately or in combination. 

On Pika ATEX, there is place for one or two joysticks. Moka ATEX series will provide up to three joysticks.  

Pika ATEX belly boxes might also be fitted with no joystick, but with various switches (key selector switches, selector switches with 2 fixed positions, 2-position buttons with return to initial position, selector switches with 3 fixed positions, 3-position buttons with return to initial position, 3-position buttons with 2 fixed positions + 1 return to initial position, rotary selector switches with 4 to 12 positions, potentiometer).

The receiver can either be wall-mounted or fixed into the electrical cabinet. Pay attention to installing the antenna outside the cabinet for proper signal propagation. 

Yes, several standard stickers are supplied as well as blank stickers for customizing. Some are to be stuck on mobile equipments, e.g a crane's beam, others to customize the transmitter itself. 

The range will vary according to the environment conditions, the position of the reception antenna, and the orientation of the transmitter (the range will be lower in the event of metal obstacles such as frameworks, partitions, enclosures, etc.).  

• 100 m in an industrial environment 
• 300 m in open space  
• 80 m – 300 m band 2.4 GHz in an industrial environment  
• 800 m – 2 Km band 2.4 GHz in open space 

Pika ATEX can be configured using its free, accessible programing software, iDialog. Either our programming team can undertake the configuration, or the user themself. 

Autonomy (25 °C) radio with activated 100% time: 10 hours. 

No, there are no different colors available – However, the front plate is customizable with symbols and languages. 

No, start-up with a badge is not available, but to secure the usage of the belly box, the start-up can be protected with a pin code, a key, or a button combination. 

If necessary, a 10 m cable for a wired link can be provided. 

The screen on Pika is dedicated to commands and feedback from sensors or a PLC. A live color video feedback would be a specific project to be discussed. 

The Pika ATEX series can control up to 32 receivers. For safety reasons, it will address one receiver at a time. With the multimode management feature, this capability could be extended to more than 1000 receivers! 

Receivers for the Pika ATEX series are not delivered pre-wired as a standard. Pre-wiring would need a specific request.