K3 / K4 Radio Remote Control Series

Push Button Radio Remote Controls

K3 / K4 Series (Radio Remote Control) — K4 Series (Radio Remote Control)

K-Series Radio Remote Controls are a state-of-the-art radio control system. Check out the many great features below! K3 has a single-speed, 12-button transmitter with E-stop, key switch, and On/Off. Up to 5 motion single-speed controls with 2 to 7 programmable auxiliary outputs, A/B outputs, alarm output, mainline output, and light output. K4 has dual-speed switches.

The K3 and K4 Series Kits include four batteries, a spare key, a spare fuse kit, an instruction manual, and a legend sheet for each transmitter. They are AC only.

Specification

Transmitter Features:

Antenna: Integrated/Internal
3-stage low power indicator
Removable Key. [For push button start, consult factory.]
Power consumption: Less than 28 mA
Powered by four standard or rechargeable AA batteries

Receiver Features:

Integrated Horn/Alarm built into the receiver
Visible external power indicator
The receiver has 2 meters (6 ft) pre-wired cable.
The receiver features an F-Style Antenna connector for easy antenna extension.

Supply Voltages: DC: 12-24; AC: 24, 48, 110, and 220. 110 V is the default. Please contact the Factory for part numbers for different supply voltages.

Specifications:

Operating Range: 330 feet (100 m) - Up to ~1000 feet (300 m) - depending on environment
Frequency: 433.05 to 434.775 MHz, depending on the operating channel
Available Channels: 70
Enclosure: Nylon with glass fiber, NEMA4 (IP65)
Emission Power: Less than 10 mW, eight-level adjustments
Channel Spacing: 25 kHz
FCC Part 15: no license required
Emission Designator: 114KF1D

Safety Features:

Emergency Mushroom Switch (EMS or “E-Stop”) is Independently Certified EN-ISO 13849-1 Category 4.
Dual Independent Micro-controllers
Dual Mainline Relays Connected in Series (Each Independently Controlled)
Current sensing jammed relay detection circuit.
Double contact on EMS in the Transmitter

Advanced Features:

Remote Pairing: The transmitter can contact a receiver and “download” the system data via radio, allowing you to replace a lost or damaged radio without additional tools.

Pitch and Catch Operation: This feature can be enabled, allowing two different operators to safely operate a single receiver.

Auto-scanning: The radio is factory programmed to choose between two channels depending upon which one is the clearest at every start; alternatively, the radio can scan all channels on site and find the clearest pair of channels to use.

Adjustable Emissions Power allows some range control of the radio and reduces the possibility of unnecessary interference by adjacent radios.

Flexible Configuration: The radio can be factory configured to handle a variety of functions, such as: