Validation Handle for Radio Remote Controls
Radio Safety Stop System
The Validation Handle for Radio Remote Controls is designed to provide an individual wireless control and protection system to authorized personnel intervening in the maintenance, adjustment, or control of dangerous equipment.
A 3-step trigger allows operation while half-pressed. When released (fall, fear) or fully pressed (electric shock) processes stop at once.
In addition, 4 function buttons allow sending some commands to the machines.
- Specification
- Downloads
Specification
Mechanical and environment withstand characteristics
- Housing Material: Two material plastic
- Protection index: IP 54
- Weight (with battery): 340 g
- Operating temperature range: -20°C to +50°C
- Storage temperature range: -20°C to +45°C
- Charging temperature range: 0°C to +35°C
Electrical and radio characteristics
- Power supply: Li-Ion battery
- Endurance (at 25°C):
- Trigger activated: 8 hours
- Trigger not activated: 40 hours
- Complete charge duration: 6 hours
Functional characteristics
- Display: Back-lighted LCD
- Function button type: 4 single-acting push-buttons
- Trigger: 3 or 2 positions
- Range limitation: configurable
- Indications: radio channel, battery level, diagnostic, displayable on enabling handle screen
Configuration of functions and display: configurable by PC software
Frequency / Transmission power
- RSEP40 and RSEP4A: 64 frequencies, from 433.100 MHz to 434.675 MHz
- RSEP41 and RSEP4B: 25 frequencies, from 434.075 MHz to 434.675 MHz
- Transmission power [mW]: 10
- Average range in a typical industrial environment:
- 250 m
- The range will vary according to the environmental conditions of the validation handle and receiver reception antenna (frameworks, metal partitions…, etc.).
