Hevi-Bar II

Single Pole Conductor Rails

Hevi-Bar II is a single-pole conductor rail system according to US standards and is used globally in industrial applications and Overhead Cranes.

The robust design permits installation in hazardous environments, such as steel mills and foundries, and in other applications, like EOT—and similar Cranes or other linear applications.

Use the Hevi-Bar II conductor rail when...

you need a rail system according to US standards
you need a modular system for bottom or side entry
you need a multiple/ flexible amount of rails
you need an optional DURA-COAT for extremely corrosive environments

DURA-COAT is ideal for galvanizing and electro-plating lines, chemical plants, smelteries, foundries, cast houses, coke- and ore-handling cranes, and oxidizing/
electro-winning facilities.

Specification

Conductor Rail Type: Single Pole
Permissible Environment: indoor/outdoor
Ampacity Conductor Bar: 500, 700, 1000, 1500 A
Nominal Voltage: 600 A
Conductor Material: Aluminium with stainless steel
- Dura-Coat available
Insulation Material: PVC / mid and extreme heat insulation cover
Temperature Range: max. 135 °C (280 F)
- Cover Temps - Low: 70 °C (160 F)
- Cover Temps - Med: 120 °C (250 F)
- Cover Temps - Extreme (700 A and 1000 A only): - 50 to 135 °C (-60 F to 280 F)
IP class: IP10
Typical Pole arrangement: 4 poles
Required installation space: Width: 400/500 mm, Height 250/350 mm
Support / Hanger Distance:
- 1.5 m (500 A)
- 3.0 m (1500 A)
Curves possible: on request
Heater Wire available: Yes (500 A only)